Sometimes to renew the appearance of our home and our doors we look for simple, economical and quick solutions. Here we bring you an economical solution that will allow you to change the handles with plates for rosettes to give your doors a renewed look and completely new air. It is an economical solution to avoid changing your doors with which you will achieve a different and renewed feeling in your home.
Tools you will need
- A screwdriver to remove the screws from the rosettes.
- 'Fix all' putty to cover and repair holes.
- A sandpaper to file the 'repair all' putty and the screw hole.
- White paint or the color of the door to paint the 'repair everything' putty and hide the repair.
- A set of rosettes to replace the plate handles.
- In the event that the set of handles with a plate had a cylinder or bolt, a set of keyholes or a bolt or bolt would also be needed. Consult our catalog of keyholes and fillers or sentences and choose the ones that best suit your doors.
Steps to take
- Remove the plate screws ; It will have screws at the top, bottom and, sometimes, under the handle you will have a screw that you will have to loosen.
- Once the screws are removed, remove the door handles .
- Next, fill the holes made by the screws in the door with the 'repair all' putty .
- Once the putty is applied, file the putty and the hole to match the wood and the hole to the door.
- You will need paint in the color of the door to paint the filed area and hide the area where the plate was installed.
- Finally, install the handle with rosette by unscrewing the rosette and putting 3 screws in each rosette.
*If you have more questions about how to install it, watch this video where the installation is done step by step;
